E-Track Straps
Ratchet straps with spring E-track fittings for logistic track systems — the slot-in end that anchors to E-track rail in trailers, vans and containers. Also written etrack straps. We make both halves of the system: the galvanized fitting and the strap it is sewn to.
What the fitting actually locks into
An E-track fitting is a spring-loaded plate that drops into the slots of a 2″ logistic rail and locates under the lip when you release the spring. The rail carries the load; the fitting only transfers it. That is why the rail fixing, not the strap, is usually the weak point in a van fit-out.
Before ordering, confirm which rail you have. E-track and A-track look similar in a photo and do not interchange, and a fitting that rattles in the slot will work loose on the road.
Spring fittings are a wear item
The spring is the part that fails. Grit in the slot, or a fitting left in a rail that is washed out, will seize the spring and turn a two-second job into a pry bar job.
Galvanized fittings are the right default for trailers and containers. For food, pharmaceutical and wash-down fleets, specify stainless — the zinc coating on a standard fitting does not survive regular cleaning.
Choosing strap length for the rail
The strap has to reach from the rail, over the load, back to the opposite rail. Measure the widest load you carry, add the height, and add 40 cm for the ratchet. A strap that only just reaches cannot be tensioned.
Standard assemblies run 2″ wide with a 2,000 kg rated fitting. Longer straps and custom lengths are made to order, and the fitting can be sewn to either end or both.
| Strap width | Fitting | Rating | Typical use |
|---|---|---|---|
| 2″ · 50 mm | Spring E-track fitting, galvanized | 2,000 kg · 4,400 lb | Cargo strap for van and trailer rail |
| 2″ · 50 mm | Spring E-track fitting only | 2,000 kg · 4,400 lb | Replacement fitting, sewn locally |
Questions buyers ask before ordering
What is an E-track strap?+
A ratchet strap whose end is a spring fitting instead of a hook. The fitting clips into E-track rail, so the anchor point can be moved along the rail instead of being fixed to one ring.
Will an E-track fitting fit A-track?+
No. The slot profile and pitch differ. Check the rail series before ordering, or send us a photo of the rail and the old fitting.
How much does an E-track fitting hold?+
The galvanized 2″ fittings we supply are rated 2,000 kg · 4,400 lb. The rail and its fasteners must be rated at least as high, which is where most van fit-outs fall short.
Can I buy the fitting without the strap?+
Yes. Fittings are supplied loose for local sewing, and as complete assemblies with the strap length you specify.
Other Ratchet Tie Down product groups
Need e-track straps to your own specification?
Widths, lengths, colors, logo printing, hook types and packaging — all made to order. Send your drawing or reference sample.