🕘 8:00 AM – 5:00 PM, Monday – Saturday (GMT+8) 📞 +86 17561670738
Product Group · 14 items

Winch Straps

Winch straps for flatbed trailers, boat trailers and recovery rigs, woven in 2″, 3″ and 4″ from high-tenacity polyester. There is no ratchet on these: tension comes from the trailer winch or hand winch, so the strap is only the webbing and its hook end. We weave and sew it in our own mill in Zhejiang, so width, length, hook type and label are all made to order.

Ask for a quotation All Ratchet Tie Down

Winch Straps

Why a winch strap has no ratchet

A ratchet strap holds tension with its own buckle. A winch strap hands that job to the drum on the trailer, which is why it is sold as a length of webbing with one hook and a plain tail. Put a ratchet strap on a winch drum and you are paying for a buckle that never gets used.

The practical difference is take-up. A winch pulls several metres of slack in seconds; a ratchet takes up a few centimetres per stroke. For a car, a quad or a pallet, the ratchet wins. For a flatbed loaded with steel or a boat on a bunk trailer, the winch is the only sensible way to pull the load forward against the bow stop.

Sizing the strap: width, working load and hook

The three widths we build cover the drum sizes in common use. Work back from the winch, not from the load: a 4″ strap will not sit flat in a 2″ drum, and a 2″ strap in a 4″ drum will bunch and wear on one edge.

The ratings below are per strap, in a straight pull. Bending the strap around a sharp corner or doubling it through a hook changes what it will actually hold.

Strap widthWorking load limitTypical drumHook ends we fit
2″ · 50 mm3,333 lb · 1,515 kg2″ winch, boat trailerFlat hook, wire double J hook, snap hook
3″ · 75 mm5,400 lb · 2,450 kg3″ winch, flatbedFlat hook, wire double J hook, chain extension
4″ · 100 mm6,670 lb · 3,025 kg4″ winch, step deck, lowboyFlat hook, wire double J hook, sewn eye, chain extension

Which hook end fits your trailer

A flat hook drops over the rub rail or stake pocket and sits flat against the steel, which is why it is the default on flatbeds. A wire double J hook reaches into a hole or around a lip that a flat hook cannot enter, and it is the one to specify for stake pockets with a lip.

A sewn eye takes a shackle or a pin, so it is the choice when the anchor point is a fixed eye rather than an edge. Chain extensions are for the last 30–50 cm, where the anchor is recessed or the geometry will not let webbing run straight. Tell us the anchor and we will match the end to it.

Questions buyers ask before ordering

Can I use a ratchet strap on a winch instead?+

You can, but you are paying for a buckle and losing usable length. A ratchet strap also has a fixed short tail, so the hook sits close to the drum. A winch strap gives you the full length of webbing to pull with.

How do I pick the length?+

Measure from the anchor point, over the load, to the winch drum, then add roughly 60 cm for wraps on the drum. Standard lengths are 20 ft, 27 ft and 30 ft; anything between 4 ft and 40 ft is made to order.

Is 3,333 lb the same as a 10,000 lb breaking strength?+

No. The working load limit is what the strap may carry in service; the breaking strength is roughly three times that. Buyers who quote a breaking strength are usually describing the webbing, not the assembly.

Do the straps come with a certificate?+

Each batch is pull tested and ships with a certificate of conformity to EN 12195-2. Third-party inspection through TÜV or SGS can be arranged and adds lead time.

Can you print our logo and sew a custom label?+

Yes. Webbing colour, printed logo, label wording and serial numbering are all made to order. Send artwork and the lengths you need for a quotation.

Other Ratchet Tie Down product groups

Need winch straps to your own specification?

Widths, lengths, colors, logo printing, hook types and packaging — all made to order. Send your drawing or reference sample.

Get a Quote