Rigging Hardware: Types, Applications and Safe Use
Shackles, hooks, master links, turnbuckles, eye bolts, wire rope clips and blocks - what each one does, where it is used, and the rules that keep a lift safe.
The seven core types
1. Shackles - connect slings, chains or ropes to a load or to lifting equipment. Anchor (bow) shackles take multi-directional loads; chain (D) shackles are narrower and suit single-leg chain work. Pin options are screw pin, safety bolt and round pin. A common reference is the G209 screw pin anchor shackle.
2. Hooks - attach directly to the load or to a sling. Eye hooks, clevis hooks, swivel hooks and self-locking hooks all serve different angles of approach. Self-locking (safety) hooks prevent accidental release under a slack line.
3. Master links - the top connection point in a multi-leg chain sling assembly. They distribute the load across all legs; a G80 forged master link is the standard choice for grade 80 chain systems.
4. Wire rope clips - form eyes or loops at the end of wire rope. A clip has a U-bolt, a saddle and two nuts; the saddle must go on the live (loaded) side. Wrong orientation is one of the most common causes of rigging failure.
5. Turnbuckles - adjust tension and length in rope, cable and tie rods. End configurations include jaw-to-jaw, eye-to-eye, hook-to-eye and jaw-to-eye, in both European and US patterns.
6. Eye bolts and swivel hoist rings - attach a sling or hook to the load itself. Plain eye bolts are for straight, in-line lifts only; swivel hoist rings articulate so the load can be lifted at an angle.
7. Blocks and pulleys - redirect or multiply pulling force. A snatch block lets a winch or crane pull at an angle and can increase line pull by adding parts of line.
Where rigging hardware is used
- Construction - hoisting steel beams, concrete panels and formwork
- Maritime - securing cargo, hoisting anchors, mooring
- Industrial - moving machinery and heavy equipment inside a plant
- Wind energy - lifting towers, nacelles and blades
- Oil and gas - offshore rig and platform components
- Events - hanging lighting rigs and stage structures
Safe use: six rules
- Inspect before every use - look for wear, corrosion, deformation, cracks, thread damage and missing pins
- Match the WLL - never use a component rated below the load it will carry; remember that angle reduces effective capacity
- Keep components compatible - a hook that is too wide for a shackle bow will side-load it
- Follow the manufacturer's instructions - especially on installation orientation
- Avoid side loading - rigging components are designed for in-line loading
- Use trained personnel - assembly and inspection of a rigging system is skilled work
Standards
Lifting accessories are governed by ASME B30.9 (slings) and ASME B30.26 (rigging hardware) in the United States, EN 1677 for forged components and EN 818 for chain in Europe. Components should carry a traceable mark showing grade, capacity and manufacturer.
As a rule: if you cannot identify the capacity of a fitting, do not lift with it.