EN 12195-2 Explained
If you sell cargo lashing straps into Europe, EN 12195-2 is the standard your buyers will ask about. Here is what it actually controls, in plain English.
What the standard covers
EN 12195-2 is the European standard for *load restraint assemblies with ratchet mechanisms* — the familiar ratchet tie down strap. It sets requirements for the webbing, the ratchet, the end fittings, the way the assembly is tested, and what must appear on the label. It is the reference buyers use when they ask whether a strap is 'CE compliant'.
What it requires in practice
| Area | Requirement in principle |
|---|---|
| Load rating | The assembly carries a declared LC (lashing capacity) in daN |
| Elongation | Webbing stretch is limited so the strap does not loosen dangerously under load |
| Testing | The complete assembly is strength-tested, not just the webbing on its own |
| Labelling | A durable label states LC, standard, manufacturer, and traceability information |
| Instructions | Safe-use guidance accompanies the product |
Why buyers ask for the declaration
A supplier who can provide an EC declaration of conformity and batch test reports is signalling that the label number is traceable to a real test. This matters most for commercial transport, where the lashing calculation and the equipment rating may be checked after an incident.
EN 12195-2 vs AS/NZS 4380
These are the two main standards for ratchet lashings in our export markets:
- EN 12195-2 — Europe; ratings in daN (LC).
- AS/NZS 4380 — Australia and New Zealand; also uses LC, and is written around local load-restraint practice.
Both differ from the US approach, where tie-downs and slings follow WSTDA / ASME standards and use WLL. When a page or a quote mentions two markets, both terms should appear so the buyer finds the wording they know.
What to ask your supplier
- Which standard is the strap built and tested to?
- Can you supply the declaration and a test report for the production batch?
- Do the webbing, ratchet and hooks all share the same LC?
- Is the label durable enough to survive transport and use?
A supplier who answers all four with documents is a safer bet than one who only quotes a price per metre.
Frequently asked questions
- What is EN 12195-2?
- It is the European standard for load restraint assemblies with ratchet mechanisms — ratchet tie down straps. It controls webbing, ratchet, fittings, testing and labelling.
- Do I need a declaration of conformity?
- For commercial transport into Europe, buyers and inspectors commonly ask for an EC declaration of conformity and batch test reports to prove the label rating is traceable.
- Is EN 12195-2 the same as AS/NZS 4380?
- No, they are separate standards for different markets, though both rate ratchet lashings by LC. Check which one your destination market requires.